List of Machines belong to Industry - Beverage (carbonated)

wetLAN 110

Langguth America Ltd

Germany

Description: wetLAN® 110 Series encompasses a family of highly flexible inline wet glue labelers. High output, mechanical simplicity, and very easy changeover mark the benefits of the wetLAN® 110 series.

Rotary Cappers

AROL Closure Systems

Italy

Description: Automatic rotary capper for various closures such as cork, ROPP screw caps, plastic caps, lug caps, snap caps, pumps and shaped plastic caps. Serving industries like pharmaceutical, cosmetic, personal care, food, chemical and other with stand-alone machines or monoblock.

MAK Rotary Labellers

Makro Labelling SRL

Italy

Description: Makro manufacture rotary labellers for label application by Self Adhesive / Cold Glue / Hot Melt or any combination of these labelling technologies onto bottles, cans and jars.

Heat Shrink Tunnel for bottles

Aesus Packaging Systems

Canada

Description: Shrinks difficult sleeve over shaped bottles. Steam delivers a better shrink than pure electric (also known as infrared or radiant). The addition of a small steam generator and specially designed steam tubes to our Infra red Tunnel gives this better shrink but at an affordable price. Several sizes are available and our 48 inch Tunnel has dual zones for both the infra red heaters and the steam tubes to enable gentle even shrink at the entrance to the tunnel and to finish with a hotter exit. The further advantage to the combination Hybrid tunnel is that only a little steam is used and so the process is much drier than it would be with a steam only tunnel and also the shrinking is completed in much less space than conventional tunnels.

Stretch Blow moulders

Meccanoplastica Iberica SL

Spain

Description: The NEW "all electric" MIPET series machinery assures the best accuracy in the movements, optimizing all the issues involved during the production. It is the fit machinery for who look for high productive performance at good price.MIPET machines are manufactured taking care of every detail and shows special design features. The height of the mould plate is reduced to a minimum (best accessibility and shortest assembly time-mould), the discharge of the bottles takes place with double tweezers (therefore half wear), the bottles output are maintained in vertical position thanks to air suction on the conveyor belt that can be adjusted in height by means of an electric motor.

F16 Fully Automatic Case Former

BlueWater Automation Inc.

Canada

Description: The F16 is a fully automatic stainless steel, washdown case former. We use a Beckhoff control system and Festo pneumatics. The unit is 4x6 feet is size and can form at up to 16 cpm.

Rotary Self-Adhesive Labeling Machine

Guangzhou UJUNR Packaging Equipment Co.,Ltd.

China

Description: Technical Parameter Power supply: Three-phase 380V 50Hz 8000W Machine Dimension: 3000*2500*2000mm Max. Labeling Speed: 24000 BPH Max.speed of label feeding: 150 meters/min Labeling accuracy: 1 mm Max. Label Width: 130 mm Max. Label Length: 500 mm Max. Label Diameter: 600 mm Paper Core Diameter: 152 mm Weight: 2500 kg

OPP Hot Melt Labeling Machine

Guangzhou UJUNR Packaging Equipment Co.,Ltd.

China

Description: Technical parameters: Power supply: Three phase 380V 50Hz 8000W Machine Dimensions: 3000*2500*2000mm Max.speed of labels feed: 150m/min Labeling precision: 0.5mm Max. label width: 150mm Max. label length: 500mm Max. label diameter: 600mm Paper core diameter: 152mm Labeling glue: hot melt, glue at both ends of each label Glue temperature: 120-160 ℃ Diameter of container: 40 -100mm Fast speed Opp hot melt labeling machines. Suitable for paste labels made of Opp, Paper-plastic composite, paper labels etc. Apply in the detergents, mineral water, beverages, food, etc.

Climax DP-4 Case Packer (drop packer)

Climax Packaging Machinery

United States

Description: DP-4 Drop Packer We believe our DP-4 is the most heavy-duty drop packer in the industry. If you have a heavy payload, this is the packaging machine for you. We are the only company that uses a solid aluminum casting for the case elevator instead of a weldment. Climax Packaging Machinery has drop packers in the field that are still running after 30 years of continuous service. If you want reliability and durability, the DP-4 drop packer is the machine for you.

Helios Steam Shrink Tunnel

CSC Packaging

USA

Description: The Helios Contour Shrink Sleeve Tunnel can be used on any shape container to shrink and conform shrink label sleeves without creating bubble marks or scaring the package. The Helios Shrink Tunnel for bottles has an all stainless steel construction, and features a cross vented dual zone chambers supplies even heat transfer to provide the perfect shrink. Built in electric steam boiler and conveyor come standard. This steam shrink tunnel for bottles can work with any brand of shrink sleeve applicators at speed up to 300 bottles per minute. The Helios Steam Tunnel will shrink most sleeve material to different type of bottles and containers, whether it is glass, PET, HDPE or aluminum.

ECO Wrap Labeler

Aesus Packaging Systems, Inc.

Canada

Description: The Aesus ECO Wrap is an entry-level, fully automatic wrap-around labeling machine for pressure-sensitive labels. This automatic wrap labeler is dedicated to round bottles or any cylindrical containers of various diameter and height. Whether you need to apply labels to plastic bottles, glass bottles, aluminum cans or tin cans, the ECO Wrap Labeler is certainly one of the best value in America when it comes to quality/price ratio. The Eco Wrap round bottle labeler offers the same powerful and servo-driven Herma 400 label head as our top end models but eliminates many bells and whistles to give a cost effective automatic wrap bottle labeler. Speeds of over 100 bottles per minute can be achieved on 3'' diameter cylindrical containers or round bottles. The Aesus ECO Wrap Labeler includes a 7ft long stainless steel conveyor, 12 inch Wrap belt, closed-frame, a swivel control box and a servo label dispenser. The control can be a simple buttons and potentiometer panel or Aesus’ standard Allen Bradley touch screen and PLC. The ECO Wrap Series most popular options are coders (thermal, hot stamp, laser), Prism Aligner (for large diameter or unstable bottles), StarPrism, vision systems, label presence sensor, conveyor extension, extra label applicator for top label and reject station.

Air Conveyor

Traktech

Spain

Description: The blowing of our air conveyor is just bellow the neck guide, so just under the bottle ring. This will ensure not blow inside the bottle. Even take a teflon neck guide and low friction rate, our air conveyors are equipped with microdry CHP. The use of lubrication on airconveyors is patented and get some big advantages over our competitors: - A reduction up to 40% of the fan consumption on an existing airconveyor. This means that new installations use less fans compared to our competitors. Cheaper installation and more energy efficient. - With the micro lubrication we ensure that the jams will stop on conveyor due to the very low friction between the neck and guide. In addition to use lubricant as Teflon, repels dirt and ensures optimal functioning of the conveyor whatever maintenance is given. - With the dry lubrication will stop the electrostatic problems due to the use of untreated preforms.

Shrink Sleeve Label Applicator LG-150

Benison & Co Ltd

Taiwan

Description: Benison Shrink Sleeve Label Applicators make adding shrink sleeves to your products easy and inexpensive. Shrink sleeve labels give your product a slick, professional and modern look, while our full-color labels ensure your brand always looks its best. Best of all, every shrink sleeve label applicator is capable of applying tamper evident seals (neck band), leaving your products safe and secure throughout their entire retail lives. The LG-150 Shrink Sleeve Label Applicator will apply full-body sleeves on bottles up to 150mm diameter at speed up to 250 bottles per minute. Benison also offers a complete range of Heat Shrink Tunnels for sleeves. Related: Shrink sleeve labeler, shrink sleeve applicator, shrink sleeving system

Labelling Machine

Brothers Pharmamach (India) Pvt. Ltd.

INDIA

Description: Automatic High Speed Sticker Labelling Machine with all latest built in features and performance. The Machine incorporates latest sophisticated User Friendly Label Dispensing System with choice of Stepper or Servo Driven System. Machine with Highspeed Label Sensor with Remote Teach Facility and unique Product Sensor which does not require any Teaching or settings. The Inbuilt Automated Label Length detection systems eliminates any need for manually feeding and storing of Label Length data in memory and retrieving the same every time for change of Label Size & re-starting the machine. The System thus saves valuable time, avoiding machine-down time, and helps achieve higher production.Smart Vertically / Horizontally Adjustable Pressing Device of the machine makes the alignments for the Height and Diameter of Containers easy and convenient.

ECO Shrink Sleeve Label Applicator

Aesus Packaging Systems, Inc.

Canada

Description: The Aesus entry-level shrink sleeve label applicator is very compact and user-friendly. Whether your requirement is to apply a safety seal (neck band) or a full-body decorative sleeve at moderate speed, the ECO Shrink Sleeve Label Applicator will meet your expectation. At only 14’’ wide, it will fit into most bottling lines without modifications. The Allen Bradley Touch Screen (HMI) is intuitive and let you control all the parameters of the shrink sleeve applicator such as speed, delays, sleeve length adjustment. The HMI also displays machine status and the PLC is also ready to control accessories such as the perforation unit, the band tapper, the feedscrews etc. The sleeve is fed by two rollers powered by servo motors, which allows perfect control of the film and therefore high accuracy. For generic neck band material, the band length is adjusted from the touch screen. Both clear and printed sleeve material can be run on the same machine with the optional photo registration sensor. The neck bands or shrink sleeves are applied to the container directly from the mandrel. This means there is no secondary side transfer or vacuum cups or other movement. Shrink sleeves go directly onto the container and a guillotine knife cuts the material. As we apply directly from the Mandrel you can have a sleeve that more closely fits the container, thereby saving band material cost, and giving better final shrink characteristics. The closer the material fits the container the smaller percentage of shrink needed. The stainless steel frame and interlock safety guards of the shrink sleeve label applicator makes is suitable for most production environment in industries like beverage, food, nutraceutical, pharmaceutical and cosmetic. The electrical cabinet located at the back of the machine is easily accessible and ergonomic. Thanks to the patented indexing starwheel, changeovers are performed quickly and easily. The time saved adds up rapidly... helping pay for the shrink sleeve applicator over and over. A complete range of Heat Shrink Tunnels are manufactured by Aesus. The economical heat gun shrink tunnels are ideal for neck band, Infra-Red and Hot Air Tunnels can be used for both neck band and some full-body sleeve application and our Patented Hybrid Tunnel (see link below) which combines steam and infra-red within the same enclosure is perfect for full-body sleeve applications. Related: Shrink sleeve labeler, shrink sleeve applicator, shrink sleeving system

MECA Premium Labeler and Capsule Applicator for Wine Bottles

Mecamarc

France

Description: Mecamarc offers a complete range of pressure-sensitive labeler and capsuling machines for wine and spirit bottles. The MECA Premium is our economical labeler to apply pressure-sensitive labels and capsules (tin or pvc) to wine bottles. This entry-level labeler and capsule applicator for wine bottles will achieve speeds of 16 bottles per minute (1000 bottles per hour). It will apply one or two labels (front and back labels) to various styles of wine and spirit bottles. Front and back labels can be on the same roll or on different rolls, depending on options. The MECA Premium wine bottle labeler and capsule applicator includes a conveyor and accumulation table. It also includes a small digital controller to facilitate set-up. The MECA Premium is a monoblock to combines label application and capsule application. For PVC capsules, the labeling and capsuling machine is equipped with a heat shrink head and for tin capsules (polylaminate capsules), it is equipped with a spinner head. Other options include code embossing, hot stamp coder and ink jet coder.

LSK Series - Shrinkwrappers

SMIGROUP

Italy

Description: The LSK series is composed of automatic shrink wrap machines to pack plastic, metal or glass containers. Depending on the model chosen, they can make packs in film only, cardboard pad + film, cardboard tray, cardboard tray + film. LSK series packers achieve an output rate up to 40 packs per minute, according to the machine model and the type of product to be handled. The pack collations can vary according to the containers shape, capacity and size; the most requested collations are: 2x2, 3x2, 4x3 and 6x4. All LSK machines are equipped with a mechanical product grouping system and are supplied with an in-line or a 90° infeed conveyour, depending on the customer’s exigencies. The change-over is manual.

Gernep Rotary Labeler Labetta SK

Gernep GmbH

Germany

Description: Rotary labeller with servo-driven bottle plates and Herma label dispensers. The bottle plates are fully programmable from the HMI and the diameter of the machine table and number of bottle plates varies depending of speed requirement.

WHD Glass Bottle Heater

Cames S.n.c.

Italy

Description: The bottle heater makes it possible to directly label cold-filled bottles (sparkling wine, beer) by using self-adhesive labels. This machine has been designed for solving the problem of condensation during the labelling process. This machine is the only one of its kind which can guarantee the traceability of the bottles, and this because during the heating process the bottles go along a guided course where the first bottle in comes out first, so as to guarantees a uniform treatment to all bottles.

Friction Feeder

Pineberry Manufacturing Inc.

Canada

Description: Applications from high speeds insertion of pharmaceutical leaflets to affixing a credit card to a backer card. Contact us for more information on how we can help with your next project.

Monoblock Corking+Wire-Hooding

OMBF SNC

ITALY

Description:

Automatic machine to dispense and apply corks on bottles and to dispense and apply wire-hoods (cage) over the corks.

MEGA ADE Rotary Labeler for self-adhesive labels

BRB GLOBUS

Italy

Description: MEGA ADE labeller can apply of up to 6 pressure sensitve labels on bottles,jars,glass or plastic.Also available with zero down time configuration,orientation systems,servo driven platforms

Monobloc canning line system

Palmer Canning

USA

Description: Palmer Canning provides robust, rotary, counter-pressure beverage can filling systems to the micro and regional craft brewing industry throughout Canada and the US. The canning line provides accurate fill volumes, easy maintenance, and low spoilage, our 12- to 36-head filling valve systems producing good fill accuracy volume with low spillage and controlled foaming for cans and bottles, with speeds from 50 to 250 Cans Per Minute. Can size changeovers are easy to do for height changes. Includes PLC control system and variable speed drives. Construction in stainless steel and integrated with seaming and fully-enclosed safety cabinet with Lexan polycarbonate viewing windows. Features include USA-made valve components, Meyer Valve design, and auto de-palletizer.

Shrink sleeve system for cans and bottles

Aesus Packaging Systems

Canada

Description: Sleeves are applied from rollstock with a sleeve applicator or by hand (requires pre-cut sleeves) and than go through shrink tunnel on a conveyor. Cans and bottles can be sleeved full or empty! Steam delivers a better shrink than pure electric (also known as infrared or radiant). The addition of a small steam generator and specially designed steam tubes to our Infra red Tunnel gives this better shrink but at an affordable price. Several sizes are available and our 48 inch Tunnel has dual zones for both the infra red heaters and the steam tubes to enable gentle even shrink at the entrance to the tunnel and to finish with a hotter exit. The further advantage to the combination Hybrid tunnel is that only a little steam is used and so the process is much drier than it would be with a steam only tunnel and also the shrinking is completed in much less space than conventional tunnels.

BenchMATE+ Tabletop Manual Labeler

Great Engineering Labeling Solutions

Australia

Description: We have named it the BenchMATE+ Now the BenchMATE+ can label from 15 mm diameter to 200 mm diameter, you can label different sizes of containers without changing set up.Light plastic bottles that normally would cause problems are easily labelled.Clear labels on clear label stock are easy to use with no set up requirements. the speed is faster then most electric models with the exception of Great Engineering’s machines. Warranty is 3 years. When the time comes to upgrade to one of our electric models, we will trade in your BenchMATE+ for 80% of the price you purchased it for

ScanTrac X-Ray inspection systems

Peco | InspX

USA

Description:

High speed (up to 2,200 units/min) x-ray inspection of products. Inspection tools, depending on application, include foreign body detection (metal, glass, rocks, stone, bone and some plastics), fill level measurement, insert inclusion check, cap presence/position check among others. Highly stable and reliable, suitable for the harshest of environments and supported by advance remote diagnostics. Configurations include conveyors (for low profile packaes of any type), side-view (for cans, jars, bottle, canisters) and pipeline (for slurries, soups, pastes, jams, meats, potatoes and other water-conveyed products).

Rotary Cold Glue Labeller Labetta

Gernep GmbH

Germany

Description: The GERNEP LABETTA cold glue labellers offer proven solution for pre-cut paper labels from a stack magazine. Flexible: when there are container combinations or bottle changes, different shaped labels can be located accurately on dry or damp bottles. The flexibility means that front, spot and back labels, neck ring labels, sparkling wine loops, swing-top cap and seal security labels, wine seals, sloping strips, medallions and tin foiling can be applied to bottles.

Wrap-Around Case Packer Model WAR250

EAR-FLAP

Spain

Description:

Wrap Around WAR250 is an automatic machine of modular structure, designed for the packaging of different containers (of plastic, cardboard, metal or glass) in boxes of corrugated cardboard or trays without film.

It can reach a production of up to 25 boxes per minute, depending on the format and type of product. The feeder of products consists in a motorized belt conveyor intralox type, controlled by an electronic frequency inverter and detectors for lack of accumulation and fallen containers. Containers are divided into lanes by a pneumatic divider. They are then transported to the head, where they are grouped. A stacker system acts when is required to do two floors, bringing up one of them and allowing the passage of the following one below. Once the containers are grouped and the flat box is placed in the right position, the double hatch opens to place containers at the point of descent. When the flat box begins to descend in order to be folded, the stacker system positions the first group on the second, ending the stacking process.

During the descent and subsequent progress, the system is folding the carton flaps, wrapping the flat box around the product. The gluing work is done through a "Hot-Melt" device. A mechanical movement gun injects the hot-melt on the front flap. Guns placed in the side arms inject the hot-melt when the box goes ahead. The length of the injected hot-melt is controlled by PLC. A generator of impulses and a new folding flaps system at the last station of the machine guarantees a perfect squared and compaction of the box. The automatic store cartons dispenser of high production incorporates absorption suckers to separate each cardboard individually.

Manual adjustment of the machine using two hand wheels with tachometer allows a fast and simple change of format, without the need for additional accessories. The side guards, with polycarbonate doors and security micros, comply with the European safety directives and allow easy access to all parts of the machine.

HD-CMA Heavy Duty Continuous Motion Autoload Cartoner

AFA Systems Ltd.

Canada

Description: The HD Cartoner brings significant productivity gains to your manufacturing line. The HD Cartoner's fall through design means product spills will fall directly on the floor which allows for easier cleaning and wipe down. The servo drives on the cartoner offer reduction in mechanical components thus minimizing overall footprint and providing smooth operation. The servo drives also provide accurate feedback and fault diagnostics as well as assisting with changeover for different carton sizes. High speeds are also achievable through the machines robust frame and rotary feeder. Numerous options can be added to the HD Cartoner including leaflet inserts, date coding, extended magazine and open flap detection. Discharge belts are also included to reduce carton marking.

Palletizing Systems with stretch wrapping machine incorporated

Acmi USA Inc. - branch office of Acmi spa

USA

Description: Compakt is the name that identifies the new line of Acmi compact palletisers. This new line represents the future of palletisation and stabilisation both in the food sector and in the beverage sector for medium-low and medium-high production requirements. The Compakt palletisers are advanced systems based on high technology industrialisation concepts and reduced footprint

ALX 926 Wide Print-area Print-and-Apply

Avery Dennison RBIS

FRANCE

Description: print and apply varaiables information on products or boxes. Could be used as a stand-alone system or integrated on labeler system as a primary label applicator.

Rotary Pouch Packing Machine

WJ Packaging Solutions Corp.

Canada (machine made in South Korea)

Description: Capacity 1 Lines: 20 – 55 PPM 2 Lines: 50 - 100 PPM Dimension(mm) 1,715(W) X 2,620(L) X 2,028(H) Packing Size(mm) 50 - 200(W) X 100 - 380(L) Filling Capacity 20 - 300g, 1,000g, 1,500g, 3,000g

Purlin Bottle Unscrambler

Purlin Industrial (Hongkong) Limited

China

Description: This belt and hook bottle unscrambler combines speed and ease of use to automatically feed bottles to a conveyor. A large quantity of bottles are placed into a bulk bottle elevator that will feed a sorting bowl on demand. The bowl will randomly feed bottles to a motorized belt system with the open neck or bottom of bottle leading and bottles will be properly positioned to allow standing them up on the conveyor. Sensors will detect accumulation of bottles on the infeed conveyor and stop and start the unscrambler on demand for a completely automated operation.

Easy Line System for Beer or Wine

Quinti Bottling Machines

Italy

Description: Easy Line System for beer. Fill carbonated liquid and apply crown caps to glass beer bottles. Easy Line System for Wine. Fill still liquid and apply cork and capsule or ROPP caps to glass bottles.

Date code inspection system

Guangzhou Sinpack Machinery Equipment Co.,Ltd.

China

Description: The Sinpack sensor uses vision technology to inspect the containers after they pass by the laser or ink coder. As the containers pass through the sensor, camera takes an image, and the image is compared to the image of the good container to determine the absence or presence of the code based on the number of date codes detected by the camera. Containers that do not match the good image will be rejected.

X-ray system for fill-level inspection

Guangzhou Sinpack Machinery Equipment Co.,Ltd.

China

Description: X-ray technology uses non-contact online inspection method, when the container passes the tube, X-ray energy is transmitted through the container. The detector measures the intensity of the beam, and then the intensity is compared to acceptable energy levels to determine the relative fill level of the container. Containers outside the limits will be rejected. X-ray can be used to measure both overfilled and underfilled products in containers. Non-contact online inspection X-ray technology Both overfilled and underfilled detection Up to 1,500 Containers Per Minute Automatically remove defective products Color Touch Screen

In-Motion Checkweigher Inspection Systems

AP Dataweigh, Inc.

United States

Description: Our machinery covers a wide range of in-motion inspection systems based on a checkweigher platform. The system can be configured to include in-motion metal detection, bar code verification, print and apply, RFID tracking, vision systems and more. All in-motion and able to communicate bi bidirectionally with Windows based communications and controls as well as with Allen Bradley based production lines.

WTP-25 Side Load Cartoner/Tray Packer

Consolidated Technologies Inc.

Canada

Description: Our Automatic Cartoner/Tray packer for beer cans/beer bottles is a side load system capable to load bottles or cans in RSC cartons and corrugated trays.... IN THE SAME UNIT. Easy to adjust for different size of packs and gentle loading system suitable for glass bottles and cans. This automatic case packer for cans or bottles is predominantly made with stainless steel components, therefore well-suited for the craft brewery environment. The machine also includes a conveyor with a lane infeed system with back pressure control and we can integrate outfeed conveyors to fit your needs. Our complete range of case erectors, tray formers and cartoners are featuring Nordson PRO BLUE Hot Melt Glue systems and interlocked safety guarding.

ECO Wrap Round Bottle Labeler

Aesus Packaging Systems, Inc.

Canada

Description: The ECO Wrap Bottle Labeling system will automatically apply pressure-sensitive labels to various diameters of round bottles and cylindrical containers. For the budget conscious the Eco Wrap Bottle Labeler sports the same powerful Servo Herma 400 ECON head as our top end models but eliminates many bells and whistles to give a cost effective automatic wrap bottle labeler. Speeds of over 100 bottles per minute can be obtained on 3'' diameter cylindrical containers on this bottle labeling system. It includes a 7ft long Stainless Steel conveyor, 12 inch Wrap belt, frame Stainless stand, a Stainless Steel control box with multiturn lockable precise speed controls. A color touch panel PLC can be added if many options are needed. Although economical this is a fine bottle labeler with a label dispense head that is so rugged and accurate that others have a hard time competing with its performance.

MBF Monoblock

MBF S.p.A.

Italy

Description: MBF designs and manufactures complete bottling systems for wines, spirits, liqueurs, beers, mineral waters, soft drinks, juices and vinegars. MBF stands out for its strong identity and the ability to anticipate the needs of a rapidly changing industry. Flexibility, knowledge, rigor, design, technology, and research. This is the genetic heritage that allows MBF to impose new standards in the bottling industry and be recognized as a leader in the world market. The technologies are designed to enable exceptional versatility in processing any size of bottle and cap. The range includes rinsing, sterilizing, slight vacuum and isobaric filling, corking and capping. A wide range of technological systems supplied as a stand alone or monoblock system.

ADHESLEEVE TECHNOLOGY

P.E. LABELLERS S.p.A.

ITALY

Description: ADHESLEEVE: Linerless roll-fed self-adhesive labelling machine suitable to apply wrap-around pre-glued labels Is the cheapest and most ecological solution in the field of Roll-fed labeling. It uses reels with already applied glue strips, which are applied to the label during the film converting process. ADHESLEEVE is a type of labelling machine which uses pre-glued transparent or white roll-fed film with thicknesses lower than the films that are normally used on the classic Roll-Fed labellers. Due to the use of thermal-shrinkable pre-glued roll-fed films, Adhesleeve, on the same machine, is able to handle shaped containers creating a Sleeve-type packaging at definitely lower costs (40% savings), granting the same packaging quality than a common sleeve applicator. So we can say that Adhesleeve is the most economical and ecological solution for roll-fed labelling. But there’s more! It is also the most flexible, immediate and cost-effective solution for the thermal-shrinking packaging.

MODULAR PLUS

P.E. LABELLERS S.p.A.

ITALY

Description: Combined and modular rotary labelling machine self-adhesive and cold glue New no constraints labeller! It is the evolution of the classic modular labeller, a state-of-the-art piece of equipment allowing its users to decide which labelling station to install, when to install it (before, during or after its purchase) and whether to install labelling units as fixed or modular fittings. Indeed, new Modular Plus offers the possibility of choosing the kind of labelling that meets current customers' needs at best. In case marketing requires it, it is possible to change the kind of application, instead of replacing the whole machine, as it was in the past. Even after the labelers purchase, it is possible to replace the existing labelling units at any time with other kinds of fittings that offer different technologies -e.g. on carts or fixed stations - as upon the labelers purchase. Carts and fixed stations are available for any kind of technology: cold glue, hot-melt, self-adhesive (including non-stop) and roll-fed equipments. Modular is a non-binding labeller assuring its users absolute freedom!

Washing & Drying machine for the outside of glass bottles, mod. LITTLE

TARDITO SAS

Italy

Description: Washing-drying machine mod. LITTLE suitable for the external washing of cylindrical filled and corked bottles. The machine is complete with a single station, including a central starwheel with step-by-step motion which transfers the bottles to the different positions for the washing and the drying actions. In the first position, high-speed rotating brushes are performing the washing of the neck and bottom of the bottle. Secondly, a top holding head is lowering down on the bottle, to keep it firmly positioned on the bottle-seat. In this position the bottle is rotating against a main brush, to achieve a good washing of its body. The water is sprayed by means of adjustable nozzles. Then the bottle is dried in 2 steps : First removal of water drops from the bottle neck by means of a compressed air blowing Complete drying of the body of the bottle by means of 2 air-blowing pipes, placed next to the conveyor chain, feeding hot air on the entire bottle surface. The blown air is always about 24°C higher in temperature that the external ambient The model LITTLE is built totally in stainless steel AISI 304, or in other material guaranteed for long-term resistance to water contact. The machine is supplied complete with safety panels conforming to EEC regulation. The machine output is adjustable electronically from 800 up to 1.200 bph actual speed, by means of a potentiometer located on the control panel.

BenchMAX Tabletop Labeler (with all attachments)

Great Engineering Labeling Solutions

Australia

Description: The BenchMAX will label glass, plastic and metal bottles, jars, tubes, vials, candles and more from the base to the very top and will label container sizes from 45mm to a 130mm. A fully-optioned BenchMAX includes a Small Container Adaptor for containers with diameters from 8mm to 45mm, an Auto Attachment for hands-free operation, and Electronic Orientation for precise positioning of export labels or oversticking. The BenchMAX is in use in pharmaceuticals, chemicals, wineries, breweries, food cosmetics, candles and for when you WIN all those wonderful awards, you can simply attach an overlay award label, and NOT stop your whole production. However, we can generally tailor a machine to meet your labelling needs and budget.

TOP LOADING CASE PACKER MOD.KOMPATTA

FAMS SRL

ITALY

Description: F.A.M.S. designs, engineers and manufactures top loading case packers, case erectors, case sealers, tray packers and gantry pallettizers for a wide range of sectors: from detergents to personal care, from home care to food and beverage. F.A.M.S. top loading case packing foresees a in-line lay-out with the product conveyor running above the case feeding conveyor. In so doing, we guarantee easier access to the multilane product feeding, smoother and faster packing cycles, less build-back pressure.

IN STOCK - Steam/IR Shrink Tunnel

Aesus Packaging Systems

Canada

Description:

For more information and a quote, please contact Oliver at oliver@packadvisors.com 

Almost new Shrink Tunnel used less than 50 hours by a co-packer.

Also includes 16' long X 4'' wide conveyor with stainless steel chain, ideal for full-body shrink sleeve application. Sufficient space is available on the conveyor to integrate your existing shrink sleeve applicator or pre-cut sleeves can by applied by hand for smaller operations. The conveyor is equipped with a servo motor and can either run in continuous-motion or intermittent-motion.
NOTES:
1) The steam hoods are NOT INCLUDED.
2) Boiler requires 600V and Tunnel requires 208V drops.

Hybrid Shrink Tunnel combining steam (with built-in boiler) and Infra-red heat (electrical) in the same enclosure. Simply hook-up power and water supply with garden hose and you are ready to start production. Small footprint and cantilevered design to make it easy to install on most existing conveyors. Very popular in craft breweries to decorate 12oz and 16oz beer cans or glass bottles with full body shrink sleeves. Cans and bottles can be sleeved full or empty! Steam delivers a better shrink than pure electric (also known as infrared or radiant). The addition of a small steam generator and specially designed steam tubes to our Infra red Tunnel gives this better shrink but at an affordable price. The further advantage to the combination Hybrid tunnel is that only a little steam is used and so the process is much drier than it would be with a steam only tunnel and also the shrinking is completed in much less space than conventional tunnels.

Find out more about Beer Cans Decorated with Shrink Sleeves